home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Fritz: All Fritz
/
All Fritz.zip
/
All Fritz
/
FILES
/
BUSINESS
/
FRNTOFF1.LZH
/
READ.ME
< prev
next >
Wrap
Text File
|
1991-01-02
|
2KB
|
23 lines
THE FRONT OFFICE tm
You will require 640,000 characters of Ramdom Access Memory to run TFO. You
may install the shareware version on either a hard disk or on a 720k diskette
laptop computer. The 6.1 version will only run on a hard disk. In either case
type "install" from the A: prompt with diskette 1 in drive A. The install pro-
gram on the diskette will copy the files from each diskette to the hard disk.
Any remaining diskettes are inserted when prompted. Please pay close attention
to the directions as you proceed with the install. In the case of 720k laptops
be sure to have two (2) formatted disks ready with one inserted in drive B:.
After the files are copied type TFO to begin. Drive and directory titles will
be confirmed and the files will be initially indexed.
If TFO will not run in your computers available memory: 1. Be sure that no TSR
programs are running. 2. Change the SET CLIPPER line to read 'R032' and then
use your own word processor with TFO. You need about 585,000 characters of RAM
to run TFO with The Write Perspective or with PC-Write 2.7., less with other
word processors. The TFO.BAT file has the line 'SET CLIPPER=V006;R132' in it.
This example reserves 132K of RAM for word processors. The Write Perspective
is run in RAM with TFO. The Config.sys file needs to have 2 lines: 'BUFFERS=8'
and 'FILES=20'. Be sure to reboot your computer after making changes to Auto-
exec.bat and Config.sys. Use The Write Perspective to check these files. You
can reach us on 603-938-2127. We also do custom programming and consulting.